IW-125-P弯管器 液压分体弯管机 平立弯三种功能工具

功 能 说 明

适用一般水管、导线管、瓦斯管、厚钢管等、角度弯曲最大90°。
1/2” 2”一次成型90°、2^1/2” -4”必需移动管子弯曲，5次才能达到弯路弧度。

产品特性：

1. 适用于发电厂及变电站的母线125mm及以下铜铝汇流排的弯曲；

2. 平弯、立弯、弯管均可，三合一，实现一机三用；

3. 设有角度标识，保证弯曲质量；

4. 25吨出力的液压油缸、强劲有力，速度快，工作效率高；

5. 采用掀盖式，便于工件取出；

6. 机体材质采用强韧合金钢，重量轻，便于携带，弯排平滑；

7. 配用快速接头，便于拆卸。

8. 装有固定架，保证工作时保持水平状态。

技术参数：

1.出力：25Ton

2.额定压力：700bar

3.最大平弯能力：Cu /Al 125mm×16mm

4.最大立弯能力：Cu /Al 125mm×12mm

5.最大弯管能力：3”

6.重量：55kg

7.标配：梅开两用扳手（19寸）、内六角扳手（5mm、8mm、10mm）各1个

平弯模1付，立弯模座1套、立弯模8付（40-80x4 40-80x5 40-80x6

40-80x8 40-80x10 100x10 100-125x10 120-125x12）、

立弯支撑块6块（4，5，6，8，10，12）油缸连接螺丝一个

弯管模7付（½¾ 1 1½ 2 2½ 3）、靠模2个、弯管中间螺丝1个

包装：机架用木箱包装，弯排模具及工具和弯管模各配一个专用铁箱。

Suitable for general water pipe, wire pipe, gas pipe, thick steel pipe, angle bending maximum 90 degrees.
1/2 "2" a molding 90 degrees, 21/2 "-4" must move the tube bending, 5 times in order to achieve the curve of the curve.
Product characteristics:
1 bus to 125mm for bending of power plant and substation and copper busbar;
2 flat bending, vertical bending, elbow can be, three in one, to achieve a machine with three;
3 with angle identification, to ensure the quality of bending;
4.25 tons of output of the hydraulic cylinder, strong and powerful, fast, high efficiency;
5 lift cover type, easy to remove the workpiece;
The 6 body is made of strong steel alloy, light weight, easy to carry, smooth bending;
7 equipped with quick connector, easy disassembly.
8 equipped with a fixed frame, to ensure that the work to maintain the level of state.
Technical parameter:
1 output: 25Ton
2 rated pressure: 700bar
3 maximum bending capacity: /Al 125mm 16mm * Cu
4 maximum vertical bending capacity: /Al 125mm Cu * 12mm
5 maximum elbow capacity: 3"
6 weight: 55kg
7 standard: Mecke dual-purpose wrench (19 inch), inner six angle wrench (5mm, 8mm, 10mm) 1
Flat bending die 1, vertical bending die seat 1 sets, bending die 8 pay (40-80x5 40-80x6 40-80x4
40-80x10 100X10 100-125x10 120-125x12 40-80x8,
6 (4, 5, 6, 8,, 12,, and 10) of the cylinder is connected with a screw.
A bending die 7 (set 11 22 pay integrant integrant integrant 3), 2, bending the middle screw profile 1
Packing: the machine frame is packed in wooden cases, bent and bent, and the tool and the bent pipe die with a special iron box.